Gas & Solid Fuel Installations
Inset and outset gas fires supplied and/or installed, as well as for cast iron inserts, hole-in-wall fires and gas stoves. All installs are commissioned and signed off with the GasSafe Register.
Open fires and log burning stoves installed. All work is commissioned and signed off with HETAS.
All makes of gas boilers, Worcester Bosch, Vaillant, Ideal and many more supplied and installed or installed only. Please enquire for all current deals on boiler supply.
All gas hobs and cookers installed. All gas and solid fuel AGA cookers and ranges installed.
Should there be no gas supply at the chimney breast, we can pick up the supply at the meter or nearest point and run it to the required position. This is normally done under the floor, but can also be done behind shirtings, channelled into plaster, surface run or channelled into concrete floors.
All rooms with gas appliances of 7 kilowatt input and above must have purpose provided ventilation of a minimum 100 square cm – equivalent to a circle 5”/125mm diameter. All rooms with an open fire or log burning stove above 5 kilowatt input must also have purpose provided ventilation of a minimum 100 square cm. Floor vents are only possible through wooden floors.
If your chimney breast has been removed and you need one for your new fireplace, no problem - we can build a new chimney breast, plastered to a finish and with a beautiful traditional brick chamber.
Constructional hearths are the rectangular concrete area, normally about 125mm thick, to the front of all chimney breasts. They inhibit the heat exchange between the fire and the wooden floors and joists. Particularly in the case of open fires, if removed, the constructional hearth must be reinstated.
If the fireplace opening has been blocked up, we'll opening it all up again and put nice beaded sharp corners to the sides and top. Should the internal brickwork of the fireplace chamber be in poor condition, we can render over it.
Should you be worried your chimney may be leaking and therefore, carbon monoxide is escaping into rooms above or into your neighbour's property, we carry out a full integrity test on your chimney to assess its fitness for purpose.
If your chimney flue is leaking and fails a smoke or integrity test, to rectify the problem, we supply and install appropriate 316 grade stainless steel chimney liners for both gas and solid fuel purposes. 904 grade is predominantly for coal burning.
Should you have no chimneys or chimney breasts, we supply and install both internal and external twin wall insulated chimney systems.
All appliances supplied, automatically carry long term manufacturer's warranty. All installations include guarantee of quality workmanship.
All work is surveyed and a written quote supplied prior to commencement of any work. All surveys are free.
ML Gas Services Ltd has full public, employer's and product insurance liability.
All work registered with Local Building Control. All gas work is registered with GasSafe and fully certificated. All solid fuel work is registered with HETAS and fully certificated.